Oil/Gas
	Power Generation
	Marine
	Mining
	Industrial
	Government

	Standard Lubrication System
	Custom Lubrication System
	API Lube Sets
	Lift & Lube for Ball Mills
	Ball Mill Lube System
	Water Wash System
	Gas Seal Panels
	Gyratory Crusher Lube System
	Pneumatic Controls & Test Panels

------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------
Trola-Dyne has the qualified engineering and assembly personnel that can permit us to be a single source supplier for necessary electromechanical hardware & controls equipment. Our support can include:

• Design Engineering - Conceptual and physical - for mechanical and or electrical equipment with the required coordination to insure system performance
• Procurement of Materials - all equipment regardless of type mechanical or electrical
• Installation and Assembly - of equipment with necessary structural components
• Factory Functional and/or Performance Testing of the systems as required; which permits customers to review the operation of the equipment prior to shipment of the equipment to the field
• Technical Support with experienced Assembly and/or Engineering personnel available to aid in supervisory assistance of the equipment's field assembly to provide safe and efficient installation of the fluid handling systems.

------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------
The success of a project depends on the capabilities of team that is assigned to execute it in a timely fashion. With the increasing level of sophisticated electro-mechanical equipment employed in today's automated systems; it's cost prohibitive for many companies to maintain a staff of experienced individuals necessary to apply today's manufacturing pump and control equipment.

Trola-Dyne has a staff of technically experienced Procurement, Engineering and necessary Support Personnel ready to become a part of your team. Our staff has been involved in a wide range of industries and most likely already has an understanding of the technical issues that are involved in your process.

Let us work with you.

------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------
In order to provide our customers the best service, the more we know about the needs of your Lubrication application, the better job we can do to provide a systems that is cost effective and easy to be maintained and operates reliably.

Below is a list of options or custom requirements that your hydraulic or lubrication application may require; please fill out the form below and submit your data, or if your prefer you can download the PDF version of the Custom Lubrication Data Sheet, fill out the data sheets with the specific requirements of your project and Fax it to us at 717-840-1734. If you have a marked-up hydraulic schematic of the required system; it would be good to send this also.

If you need assistance in completing this document and would like to talk to an application engineer, please call 717-840-1770 or email us at info@trola.com and we will be happy to discuss your specific concerns.

------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------
Download PDF: Custom Lubrication Data Sheet

Project Name:
Requested By:
Phone Number:
Email Address:

---

I.	DESIGN STANDARDS REQUIRED: No    Yes API or ASME Applicable Standard No.

---

II.	MECHANICAL COMPONENTS: Water Cooler ASME Design: Yes    No Filter ASME Design: Yes    No Special Materials Requirement: Reservoir Piping Foot Print Size of Reservoir: Length x Width Reservoir Volume/Size: Gallons

---

III.	SYSTEM OPERATING CONDITIONS: Max. Temperature of Ambient Air: °F Min. Oil Operating Temperature: °F Max. Oil Operating Temperature: °F Coolant Fluid (water): Min. Temp: °F Max.Temp: °F

---

IV.	LUBRICATION FLUID TYPE & PROPERTIES: Type of Fluid (ex. ISO VG 64 Oil): Fluid Viscosity Characteristics: SUS °F

---

V.

HEAT LOAD/COOLER DESIGN: Heat Load (in Horsepower): Horsepower Required Oil Flow Delivery (to Bearing): GPM Required Oil Pressure (to Bearing): PSIG Max. Permissible Pressure Drops:   Cooler's Oil: PSID Cooler's Coolant: PSID Type of Coolant Fluid other than water: Note: Supply to Trola-Dyne Fluid Data Information Sheet

---

VI.

ELECTRIC MOTOR & PUMP REQUIREMENTS: Primary Motor: Housing Type: (TEFC, OPDP, or TENV etc.) Supplied Power: VAC Phases Hz Backup Pump Motor: Required? Yes    No Housing Type: (TEFC, OPDP, etc.) Supplied Power: VAC or DC Phases Hz If DC Motors are required, Specify: VDC Operating Voltage Range of the DC Supply: Max. Temperature of location of Motors: °F Special Comments:

---

VII.	OIL RESERVOIR ELECTRIC HEATER POWER: Power: VAC Phases Hz Sizing Requirements for Heater: Note: Max Heat Flux into Fluid: Special (Normally 10 WATTS/Sq. In.)

---

VIII.

PUMP DISCHARGE FILTRATION: Filtration required on Skid?: Yes    No Duplex Type Filter: Yes    No Filtration Level: Microns Absolute Electrical Diff. Press. Indicator: Yes    No Special Filtration Comments:

---

IX.	REQUIRED ADDITIONAL SENSORS OR GAUGES: Sensor Type of Device Mounting Type of Fluid Location of Sensor Flow Level Pressure Temperature Oil Cleanliness Level Loss of Main Pump Special Sensor

---

X.

ADDITIONAL DESIGN REQUIREMENTS: 1. Remote Mounting of the Pump(s) from the Reservoir: 2. Supply of Return Oil Filtration Filters: 3. Supply of Oil Sampling Ports: 4. Special Remote Monitoring: 5. Additional Reservoir Breather Filters: 6. System Max. Permissible Sound Level: 7. Device Identification Name Tag Requirements: 8. Special Safety Lock-Out or Isolation Valves: 9. Interface Connector Requirements (SAE or ANSI Flanges Etc.) Type of Permissible Hydraulic Connectors to Use on the Lube Skid or Fluid Quick Disconnect Fittings Requirements: 10. Special Fluid Seal Requirements: 11. Reservoir Vibration Isolation Mounts: 12. Reservoir Size Limitations: Supply Trola-Dyne a Sketch fo the Required System Layout

---

XI.

SPECIAL MATERIALS TESTING OR HARDWARE CERTIFICATIONS REQUIREMENTS: List the specific requirements and applicable standards for all special Non Destructive Testing such as: Mangetic Particle or radiography to verify the integrity of the welds or other additional types of special testing to locate manufacturing defects. Define additional requirements for Mill Certifications etc.

---

XII.	SPECIAL FUNCTIONAL TESTING REQUIREMENTS OF THE ASSEMBLY: List the specific functional requirements to be completed at the factory for the assembled unit.

---

XIII.	SPECIAL FINAL DRAWING REQUIREMENTS OF THE ASSEMBLY:

Home | Contact Us | Company Profile | Industries Served | Products | QA Manual | Service & Repair

TROLA-DYNE Lubrication & Hydraulic Equipment designed and manufactured to your specifications 7 Interchange Place, York, PA 17406 • Phone: 717-840-1770 • Fax: 717-840-1734 • Email: info@trola.com

Site Designed by YISI